Facilities Engineering Supervisor
Job Description SummaryThe Facilities Engineering Supervisor is responsible for maintaining and growing the Columbus West facility and related systems including building maintenance, grounds keeping, safety, environmental compliance, project work, vendor management and related documentation. Regular, punctual attendance is an essential job function. Have the ability to speak, read and write English. Ensure compliance with the BD quality systems, policies, procedures and safety regulations in addition to all local, state and federal safety & environmental regulations.
Job Description
Responsibilities
Responsible for the design, layout, installation, validation and maintenance of all facility and utility systems such as air compressors, steam boilers, electrical service, WFI water, potable water, compressed gases, vacuum, etc.
Responsible for maintaining and improving facility equipment reliability and upgrading all plant facilities.
Responsible to budget, justify, design and coordinate all new construction, such as building renovation, clean room construction, etc. project work.
Responsible for the plant grounds, image, appearance both internal and external to the facility.
Provide leadership and development to direct reports including overall performance evaluation. Initiate and coordinate training programs for direct reports.
Assist in annual budget preparation and monitoring budget spend throughout the year.
Utilizes necessary professional engineering firms to ensure facility renovations and improvements comply with all applicable codes and regulations.
Review work orders, complete maintenance requests, and write purchase orders.
Monitor contractor workmanship progress and compliance with insurance and safety requirements.
Assess risks of key systems and create plans to address gaps. Initiate cost reduction programs, particularly in the areas of utility costs and productivity.
Coordinate facility preventive maintenance programs and records.
Emergency responder and Incident commander.
Leader of programs such as Atlas. Requiring innovation, solid communication and presentation skills.
Compliance with local, state and national environmental practices and laws. Evaluate manpower requirements and skills needed for positions including overtime needs and authorization of recommend subcontracting work as appropriate.
Other duties as assigned.
Deliverables
Project Planning and Execution Prepares and implements project or improvement plans for areas of responsibility including but not limited to: efficiency improvements, cost reduction or quality improvement programs, environmental compliance, new product support and other process improvements. The plan or proposal is to include the proposed technical approach, estimated implementation costs, estimated resource needs, and a time schedule, (Gantt chart). Acts as the driving force for the project, coordinating all resources and activities necessary to ensure on time execution to the project or process improvement plan, identify and work through barriers that hinder progress.
Preventive Maintenance Planning and Coordination Responsible for managing all PM plans and tasks within assigned area to ensure effective completion of maintenance according to PM schedule. Follow up on machine breakdowns with any necessary updates to the PM system to facilitate continuous improvement of machine reliability.
Technical Writing / Documentation Must possess excellent technical writing ability. Required to prepare specifications, thoroughly documents all equipment, machines, and tooling with accurate and clear detailed prints and maintenance instructions.
Validation With the assistance of the Quality Engineer and validation team, creates all necessary documentation associated with the BD change control process and coordinates validation activities to ensure on time execution according to the project or process improvement plan.
Manufacturing Support Provides technical guidance as needed to manufacturing and hourly technical personnel during the start up of new or changed products and processes. Uses good decision making, problem solving, and trouble-shooting techniques to minimize the potential loss or correct ongoing manufacturing issues.
Capital Request / Capital Management Prepares a plan for procurement of capital equipment including obtaining of quotes, vendor investigation, budgeting, and scheduling. Prepares specifications, place orders, coordinate procurement, install equipment, debug and coordinate the start up of new or modified equipment from outside firms or as modified internally, manages capital spending on assigned projects to ensure spending in accordance with the plan capital budget.
Design Coordinate design activity with outside vendors or internal departments as necessary. If resources are unavailable, perform own design and drafting as required. Redesigns or oversees the redesign of existing equipment to incorporate improvements relating to safety, machine reliability, product quality, environmental compliance and / or cost reduction.
Leadership - Supervise engineering and technical associates to support regular facility maintenance and capital projects.
Requirements:
Bachelors Degree in an Engineering discipline from a recognized, accredited university.
Minimum of 5 years working in a plant facility engineering role.
Primary Work LocationUSA NE - Columbus (West)
Additional Locations
Work Shift
. Apply now!Estimated Salary: $20 to $28 per hour based on qualifications.
Job Description
Responsibilities
Responsible for the design, layout, installation, validation and maintenance of all facility and utility systems such as air compressors, steam boilers, electrical service, WFI water, potable water, compressed gases, vacuum, etc.
Responsible for maintaining and improving facility equipment reliability and upgrading all plant facilities.
Responsible to budget, justify, design and coordinate all new construction, such as building renovation, clean room construction, etc. project work.
Responsible for the plant grounds, image, appearance both internal and external to the facility.
Provide leadership and development to direct reports including overall performance evaluation. Initiate and coordinate training programs for direct reports.
Assist in annual budget preparation and monitoring budget spend throughout the year.
Utilizes necessary professional engineering firms to ensure facility renovations and improvements comply with all applicable codes and regulations.
Review work orders, complete maintenance requests, and write purchase orders.
Monitor contractor workmanship progress and compliance with insurance and safety requirements.
Assess risks of key systems and create plans to address gaps. Initiate cost reduction programs, particularly in the areas of utility costs and productivity.
Coordinate facility preventive maintenance programs and records.
Emergency responder and Incident commander.
Leader of programs such as Atlas. Requiring innovation, solid communication and presentation skills.
Compliance with local, state and national environmental practices and laws. Evaluate manpower requirements and skills needed for positions including overtime needs and authorization of recommend subcontracting work as appropriate.
Other duties as assigned.
Deliverables
Project Planning and Execution Prepares and implements project or improvement plans for areas of responsibility including but not limited to: efficiency improvements, cost reduction or quality improvement programs, environmental compliance, new product support and other process improvements. The plan or proposal is to include the proposed technical approach, estimated implementation costs, estimated resource needs, and a time schedule, (Gantt chart). Acts as the driving force for the project, coordinating all resources and activities necessary to ensure on time execution to the project or process improvement plan, identify and work through barriers that hinder progress.
Preventive Maintenance Planning and Coordination Responsible for managing all PM plans and tasks within assigned area to ensure effective completion of maintenance according to PM schedule. Follow up on machine breakdowns with any necessary updates to the PM system to facilitate continuous improvement of machine reliability.
Technical Writing / Documentation Must possess excellent technical writing ability. Required to prepare specifications, thoroughly documents all equipment, machines, and tooling with accurate and clear detailed prints and maintenance instructions.
Validation With the assistance of the Quality Engineer and validation team, creates all necessary documentation associated with the BD change control process and coordinates validation activities to ensure on time execution according to the project or process improvement plan.
Manufacturing Support Provides technical guidance as needed to manufacturing and hourly technical personnel during the start up of new or changed products and processes. Uses good decision making, problem solving, and trouble-shooting techniques to minimize the potential loss or correct ongoing manufacturing issues.
Capital Request / Capital Management Prepares a plan for procurement of capital equipment including obtaining of quotes, vendor investigation, budgeting, and scheduling. Prepares specifications, place orders, coordinate procurement, install equipment, debug and coordinate the start up of new or modified equipment from outside firms or as modified internally, manages capital spending on assigned projects to ensure spending in accordance with the plan capital budget.
Design Coordinate design activity with outside vendors or internal departments as necessary. If resources are unavailable, perform own design and drafting as required. Redesigns or oversees the redesign of existing equipment to incorporate improvements relating to safety, machine reliability, product quality, environmental compliance and / or cost reduction.
Leadership - Supervise engineering and technical associates to support regular facility maintenance and capital projects.
Requirements:
Bachelors Degree in an Engineering discipline from a recognized, accredited university.
Minimum of 5 years working in a plant facility engineering role.
Primary Work LocationUSA NE - Columbus (West)
Additional Locations
Work Shift
. Apply now!Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
